Add NAT Gateway Port Forwarding Rule - CreateNATGWPolicy

Overview

Add NAT Gateway Port Forwarding Rule

Definition

Public Parameters

Parameter Name	Type	Description Information	Required
Action	string	Corresponding API command name, the current API is `CreateNATGWPolicy`.	Yes
PublicKey	string	The user’s public key can be obtained from Console	Yes
Signature	string	User signature generated based on public key and API command, see Signature Algorithm	Yes

Request Parameters

Parameter Name	Type	Description Information	Required
Region	string	Region. See List of Regions and Availability Zones	Yes
ProjectId	string	Project Id. If not filled in, the default project is used. Sub-accounts must be filled in. Please refer to the GetProjectList interface.	No
NATGWId	string	NAT Gateway Id	Yes
Protocol	string	Protocol type. Enumerated values are: TCP, UDP	Yes
SrcEIPId	string	Source IP. Fill in the corresponding EIP Id.	Yes
SrcPort	string	Source port. You can fill in a fixed port or a port range. The supported port range is 1-65535.	Yes
DstIP	string	Target IP. Fill in the corresponding target IP address.	Yes
DstPort	string	Destination port. You can fill in a fixed port or a port range. The supported port range is 1-65535.	Yes
PolicyName	string	Forwarding policy name. Default is empty.	No

Response Field

Field Name	Type	Description Information	Required
RetCode	int	Return status code. If it is 0, it means successful return. If it is not 0, it means failure.	Yes
Action	string	Operation command name.	Yes
Message	string	Returns an error message, providing detailed description when `RetCode` is non-zero.	No
PolicyId	string	Policy Id assigned at creation	Yes

Example

Request Example


https://api.surfercloud.com/?Action=CreateNATGWPolicy
&Region=xxx
&ProjectId=xxx
&NATGWId=voSmtyDG
&Protocol=TCP
&SrcEIPId=MXCFGaVb
&SrcPort=NIQlfARc
&DstIp=WPpinHDz
&DstPort=NjuwdUIK
&PolicyName=MGnDgSGN

Response Example


{
  "Action": "CreateNATGWPolicyResponse",
  "PolicyId": "FXizRyCb",
  "RetCode": 0
}