Update ACL rules - UpdateNetworkAclEntry
Overview
Update ACL rules
Definition
Public Parameters
| Parameter Name | Type | Description Information | Required |
|---|---|---|---|
| Action | string | Corresponding API command name, the current API is UpdateNetworkAclEntry. | Yes |
| PublicKey | string | The user's public key can be obtained from Console (opens in a new tab) | Yes |
| Signature | string | User signature generated based on public key and API command, see Signature Algorithm | Yes |
Request Parameters
| Parameter Name | Type | Description Information | Required |
|---|---|---|---|
| Region | string | Region. See List of Regions and Availability Zones | Yes |
| ProjectId | string | Project ID. If not filled in, the default project is used, and the sub-account must be filled in. Please refer to the GetProjectList interface. | No |
| AclId | string | ACL's ID | Yes |
| EntryId | string | Entry Id that needs to be updated | Yes |
| Priority | int | The priority of the Entry, for the same Direction, cannot be repeated. | Yes |
| Direction | string | Outbound or Inbound ("Ingress", "Egress") | Yes |
| IpProtocol | string | Targeted Protocol Rules | Yes |
| CidrBlock | string | CIDR representation of IPv4 segment | Yes |
| PortRange | string | Targeted Port Range | Yes |
| EntryAction | string | Behavior of the rule ("Accept", "Reject") | Yes |
| Description | string | Description | No |
| TargetType | int | Application target type. 0 represents 'All resources within the subnet', 1 represents 'Specified resources within the subnet'. The default is 0. | No |
| TargetResourceIds.N | string | Application target resource list. It is effective for all resources by default. This value does not need to be filled in when TargetType is 0. | No |
Response Field
| Field Name | Type | Description Information | Required |
|---|---|---|---|
| RetCode | int | Return status code. If it is 0, it means successful return. If it is not 0, it means failure. | Yes |
| Action | string | Operation command name. | Yes |
| Message | string | Returns an error message, providing detailed description when RetCode is non-zero. | No |
Example
Request Example
https://api.surfercloud.com/?Action=UpdateNetworkAclEntry
&Region=cn-bj
&AclId=netacl-xxxxxx
&EntryId=netaclentry_xxxxxx
&Priority=4
&Direction=Ingress
&IpProtocol=TCP
&CidrBlock=0.0.0.0/0
&PortRange=1-65535
&EntryAction=WefbebUQ
&Description=kazGjdPZ
&TargetType=4
&TargetResourceIds.n=JNflNaTvResponse Example
{
"Action": "UpdateNetworkAclEntryResponse",
"RetCode": 0
}
